Second-Hand

This iconic Fender combo was made in 1972, all hand wired with no PCBs it delivers an organic sound which beats more modern versions, hands down


If you're looking for one of these, you know what it does, but to save confusion the features are:

Output: 100w RMS
Speakers: 2 x 12" (Eminence, Square Magnets) Internal, plus extension output
Channels: 2 (Two inputs each)
FX: Reverb and Vibrato with original footswitch
Individual Channel volumes
Bright Switch on each channel
Separate EQ on each channel
Master Volume
Chrome swivel 'tip' stands
Castors fitted

A seriously good bargain, if you're looking for that definitive Fender Twin sound. The amp has been completely serviced and re-valved by BBZ and sounds great. The tolex cover is in great shape for the year and there's a half inch 'cut' in the grill cloth which can just be made out towards the bottom right hand side in the photo... Seriously good condition for a 39 year old amp. The book value on this amp is about £1,200.00, so at £950 it is a good deal for an authentic hand wired Fender without any PCBs!

Customer collection ONLY please!

The Fender Champion 600 is a fun and affordable tribute to a rare and historic Fender amp.

The Fender Champion 600 is a 5-watt tube amp with a 6” speaker and 1950 “two-tone” looks. We added a higher-gain preamp circuit to let the overdriven tone exceed that of the original, and we added a choice of high- or low-gain inputs. Internal speaker jack enables use of a larger speaker cabinet.

Fender Champion 600 main features include:

•Type: TUBE AMPLIFIER
•Output: 5 watts
•Ohms: 4 ohms
•Speakers: One 6", 4-ohm Special Design driver with ceramic magnet (0073904000)
•Channels: Two (Instrument and Microphone)
•Tube Preamp and Tube Power Amp (One 12AX7 tube; One 6V6 tube).
•5 watts into a 6" Special Design speaker.
•High-gain and low-gain inputs; hotter preamp circuit than the 1950 original for warm natural overdrive when turned up.
•Single volume control.
•External speaker output.
•Brown and blonde vinyl covering; vintage-correct 1950 "two-tone" cosmetics.
•Leather strap handle.
•Red jewel pilot light.
•Controls Volume
•Weight 15 lbs. (7 kg)
•Dimensions Height: 11" (28 cm), Width: 12" (31 cm), Depth: 7.5" (19 cm)
•Tube Complement 1-12AX7A, 1-6V6 (diode rectifier)

The amp is in perfect condition and comes with full documentation

**Used (slightly) Laney GH50L All valve guitar head. New this amp is being sold at a discount price of £515, online... So at this price we don't expect it to be around for long**


Laney GH50L 50w Valve Guitar Amplier Head

Laneys GH50L Head is an all valve guitar amplifier that is extremely versatile, a single channel amplifier with footswitchable Gain, the GH50L is capable of crystal clean tones right through to monstrous high gain dirt. Fitted with ECC83 preamp valves and EL34 output valves you get all the greatness and awesome tone of the “All Valve” amplifiers that you’ve heard everyone talking about. The GH50L has your usual Treble, Bass and Middle EQ controls plus a resonance control and presence, the head also features an Fx loop and switchable valve bias.


The GH50L is designed to be used with Laney’s GS412IA and GS412IS cabinets which enhance the great tones that are at your fingertips with this head. The head comes in a 674 x 231 x 250 enclosure covered with vinyl, metal corners and a carrying handle, and all this weighing in at 20Kg meaning this head is easily transported and easy on your back. The front grill is a black and white material with the Laney logo.

Power RMS: 50 Watts
Inputs: Hi & Lo Jacks
Equalisation: Bass, Middle, Treble
Master Presence Control: Yes
Switchable Resonance: Yes
Preamp Valves: Premium ECC83
Output Valves: Premium EL34
Class: A/B
Footswitch: FS1 (Not included)
Speaker connections: Connections for 1 x 16 ohm, 2 x 16 ohm, 1 x 8 Ohm, 2 x 8 ohm
FX Loop: Yes (Switchable Insert / Side Chain) with return level
Weight: 20 Kg
Dimensions: Width 678 x Height 240 x Depth 253

This amp is in perfect condition, hardly played. You are welcome to try it before you buy it!

**Used 1980s Marshall Mosfet Lead 100 head. A great vintage amp at a bargain price

The Marshall Lead 100 Mosfet model 3210 amp was produced in the mid to late 80’s. It was one of Marshall earliest solid state amplifies and predates the Valvestate and MG series of solid state amplifiers.

A mosfet is a type of solid state transistor. Mosfet is an acronym for
Metal Oxide Semiconductor Field Effect Transistor. AKA 'Plastic Valves'!

The lead 100 mosfet is loosely associated with the JCM 800 line of tube amps. The physical size of the head is a little smaller than a JCM 800. There are two channels that share a common EQ. The amp has an reverb and effects loop. There is an optional two button footswitch for boost or reverb. Without the footswitch plugged in you can actually combine the clean and gain channels for some different tones.

The voicing is similar to a JCM 800. It’s not a modern SUPER high gain amp and delivers more of a crunch tone. The amp is quite capable to pull off classic rock tones such as AC/DC and Aerosmith and early Def Leppard. To get more modern distortion tones or a real singing lead a boost is required. The clean is not totally clean and has some grit to it.

Like most older Marshall the tone controls are not hugely effective. The treble has the most effect on the tone. The mids and bass are much more subtle. Thanks in part to the limited tone controls it’s hard to dial in a bad tone. There seems to be a high pass filter which limits the bass response compared to some modern amps.

Additional two button Marshall-esque footswitch at £25.


This amp is in great condition, the black dye on the cloth (where the Marshall logo is), has faded to a vintage golden colour on the model in store. Currently there is an option of buying a Marshall (MG412A), 4 x 12 cabinet with this amp... Bought together the head and cab are offered for £400. (Cab seperately is £150).

You are welcome to try it before you buy it!

**Used (slightly) Fender Hot Rod Deluxe 40 Watt 1 x 12 Valve Combo**

The Fender Hot Rod Deluxe is the world standard for a portable, powerful and fully-featured tube amp.

The Fender Hot Rod Deluxe III produces awe inspiring Fender tone from a 12 inch Celestion G12P-80 speaker fuelled by a pair of 6L6 Groove Tube output tubes and three 12AX7 preamp tubes. You get three channels—"normal," "drive: and "more drive"—with gain and master controls for the "drive" channel and a "bright" switch for the "normal" channel.

The Hot Rod Deluxe Amp has ample power for the average club gig combined with portability and the rich warmth of a genuine Fender tube amp. Other features include FX loop, Fender long-spring reverb, external speaker jack, internal variable bias control, two-button three-function channel footswitch, black panel with vintage pointer knobs, black textured vinyl covering and silver grille cloth. Hot Rod Deluxe Cover included.

The main features of the Fender Hot Rod Deluxe III include:

•The Hot Rod Deluxe amp is a world standard for a portable, powerful and fully-featured tube amp
•All Tube preamp and power amp
•40 watts into 8 ohms output
•Easier reading black control panel
•New badge design
•Graduated volume and treble pot tapers
•"Tighter" overdrive
•Celestion G12P-80 speaker
•Low-profile "pedalboard friendly" footswitch
•Three Selectable Channels (Normal, Drive and More Drive)
•Features Independent Gain and Master Controls in Drive Channel, Bright Switch, Effects Loop, Reverb, External Speaker Jack, 2-Button 3-Function Footswitch for Channel Select, Drive Select and "More Drive" Select, Chrome Panel, Vintage Pointer Knobs, Internal Variable Bias Control
•Controls include Presence, Reverb, Master, Middle, Bass, Treble, Drive Select Switch, Drive, Volume, Bright Switch, Standby Switch
•2-Button 3-Function Footswitch for Channel Select, Drive Select and "More Drive" plus cover included with this Amplifier
•Weight: 45 lbs. (20.41 kg)
•Height: 18.75 inch (47.62 cm), Width: 23.5 inch (59.69 cm), Depth: 10.5 inch (26.67 cm)


This amp is in perfect condition, hardly played, we even had to unwrap the footswitch to test it! You are welcome to try it before you buy it!

RRP is over £999, so this is a deal price!! It is what we have termed USED, although it is more like ex-Demo and has been completely serviced, prior to being offered for sale !!!!






The Custom Valve 50BLUE is based on the already extremely popular Custom Valve 40, which was a past Guitar Player™ Editor's Pick Award Winner.
Real tube overdrive is provided by three premium Sovtek 12AX7A dual triode preamp tubes while the 50 watts of real tube power is provided by two Sovtek EL34 power tubes (replaced by Cryogenic Harma E84Ls). The internal gadgetry in this channel switching amp provides great flexibility, but makes it very easy to get a great tone.

The combination of the tube power and the Celestion™ Vintage 30 speaker can only be described as magical. They have added a Blue Nubtex covering, black grille, black logo as well as black plastic corners along with the EL34 power tubes to complete a whole new look and feel that is destined to become a classic. This combined with the Celestion™ Vintage 30 speaker help gives the Custom Valve 50BLUE a rich "boutique" look, sound and feel.

The three basic tones (clean, crunch and overdrive) are easily defined. Great tone at low levels can be easily achieved, thanks in part to the addition of a Master volume control not found on the 20 and 40 watt Traynor amps in the Custom Valve series. The voicing of the lead channel has been tweaked to provide a more ominous or darker "British" tone, a natural evolution for an amp powered by EL34 power tubes as this complements the tubes natural tonal characteristics.

You'll love the tone and instantly recognize the value. Although signal-to-noise is not normally a specification that is discussed where guitar amplifiers are concerned, the ultra-quiet Custom Valve 50BLUE makes it an issue. Experienced professional users will appreciate the auto-matching tube circuit that maintains bias balance as tubes age ensuring hum free performance. Also, the DC filaments on the preamp tubes that all but eliminate hum. Listen carefully. Although the Custom Valve 50BLUE has a tremendous amount of gain it remains virtually hum free. The rear mounted control panel is easy to access, yet recessed for protection...

· YS Model #:YCV50BLUE
· 100% Designed & Manufactured in North America
· All-tube design with two EL34 and three 12AX7A Premium tubes
· A Single 12 inch Celestion Vintage30 speaker for great classic sound and performance
· Using all plywood for the construction of the cabinet guarantees the durability and rigidity that made Traynor famous
· Separate tone controls on each of the two channels (lead and clean) for flexibility
· Classic Long-Style Accutronics® Reverb, with dual springs, for authentic vintage sound
· External speaker jack for the ultimate in versatility
· A special DC powered filament supply on preamp tubes ensures reduced hum
· Auto-balancing bias supply means no need for matched pairs of output tubes or bias adjustments, allowing extremely easy emergency tube replacement
· Fully regulated power supply ensures ultra low noise with tube rectifier emulation
· Heavy gauge perforated grille with black cover
· Custom design "Chicken Beak" knobs

Specifications:
- Tube Guitar Amplifier Cabinet Impedance (Ohms) 8 Power min. impedance (Watts) 50 Minimum Impedance (Ohms) 4 Speaker Configuration
- LF (Size / Power) 12 inch / 40 Watts Input Channels 2 Channel 1
- inputs 1/4 inch phone Channel 1
- controls Gain, Volume, Treble, Bass, Middle Channel 1
- switches Boost Channel 2
- inputs Shares ch 1 input Channel 2
- controls
Volume, Treble, Bass, Middle Channel 2
- switches
Channel Select, Brightness Channel Switching Yes Master Volume Control Yes Line Out (type / configuration) 1/4 inch TRS / Rear (Effects Send) Effects Volume Yes Effects Loop / Location Yes / Rear Effects Footswitch / Function Yes / Channel Select, Boost Internal Reverb / Effects Spring Reverb LED Indicators Channel Select, Boost, Power, Standby External speaker output / location 1/4 inch / Rear Other Features Standby Switch – Activates standby mode to keep the tubes warm while the amp is not in use.
Auto Tube-matching Circuit Preamp Tube
- 3x Sovtek 12AX7WA Dual Triodes (Russia) Power Amp Tube
- 2x Electro Harmonix EL34 Early Mullard Style DC filaments on preamp tubes eliminate hum Fully regulated power supply with tube rectifier emulation Perforated Steel Grille

Dimensions (DWH, inches) 9.5 x 23 x 18 Dimensions (DWH, cm) 24 x 58 x 46 Weight (lbs / kg) 50 / 23

Great Marshall, Vox or Fender tones are available a-plenty from this amazing amplifier.

RRP is well over £1k, so this is a deal price!! It is what we have termed USED, although it is more like ex-Demo and has been completely serviced, prior to being offered for sale !!!!



The next installment for the new generation of Traynors is the Custom Valve 40T (YCV40T). Real tube overdrive is provided by three 12AX7WA dual triode preamp tubes while real tube power is provided by two 5881WXT beam power tubes. The internal gadgetry in this channel switching amp provides good flexibility, but makes it very easy to get a great tone. The combination of the tube power and the two Celestion™ Tube 10 speakers is magical. The three basic tones (clean, crunch and overdrive) are easily defined. With great tone at low levels, and shine and punch at full tilt, the Custom Valve 40T is already receiving rave reviews. We challenge you to compare us to the competition. You'll love the tone and instantly recognize the value.

Although signal-to-noise is not normally a specification that is discussed where guitar amplifiers are concerned, the ultra-quiet Custom Valve 40T makes it an issue. Experienced professional users will appreciate the auto-matching tube circuit that maintains bias balance as tubes age ensuring hum free performance. Also, the DC filaments on the preamp tubes that all but eliminate hum. Listen carefully. Although the YCV40T has a tremendous amount of gain it remains virtually hum free.

The unique "nouveau-retro" packaging of this amp makes it perfect for the leading edge or historical enthusiasts. Though the look is very fresh, the Custom Valve 40 stays true to the original Traynor line with black vinyl-covering, chrome plated corners, all plywood construction, and a classic front-mounted Traynor logo. The rear mounted control panel is easy to access, yet recessed for protection.

Features
•Auto-matching tube circuit maintains bias balance as tubes age ensuring hum free performance throughout tube life.
•DC filaments on preamp tubes eliminate hum.
•Fully regulated power supply with tube rectifier emulation.
•Long Accutronics spring reverb.
•Classic Celestion™ speaker.
•All plywood enclosure.
•Heavy gauge perforated grille with cloth cover.
•Custom design "Chicken Beak" knobs.
Specifications
Type Tube Guitar Amplifier
Cabinet Impedance (Ohms) 4
Power @ min. impedance (Watts) 40
Minimum Impedance (Ohms) 4
Speaker Configuration - LF (Size / Power) 2x10 inch / 40 Watts
Inputs 2
Channel 1 - inputs 1/4 inch phone
Channel 1 - controls Gain, Volume, Treble, Bass, Middle
Channel 1 - switches Boost
Channel 2 - inputs Shares ch 1 input
Channel 2 - controls Volume, Treble, Bass, Middle
Channel 2 - switches Channel Select, Brightness
Channel Switching Yes
Main Tone Controls Presence
Line Out (type / configuration) 1/4 inch TRS / Rear (Effects Send)
Effects Volume Yes
Effects Loop / Location Yes / Rear
Effects Footswitch / Function Yes / Channel Select, Boost
Internal Reverb / Effects Spring Reverb
LED Indicators Channel Select, Boost, Power, Standby
External speaker output / location 1/4 inch / Rear
Other Features Standby Switch – Activates standby mode to keep the tubes warm while the amp is not in use.
Auto Tube-matching Circuit
Preamp Tube - 3x 12AX7WA Dual Triodes (Russia)
Power Amp Tube - 2x 6L6GB Beam Power Tubes (Russia)
DC filaments on preamp tubes eliminate hum
Fully regulated power supply with tube rectifier emulation
Perforated Steel Grille
Dimensions (DWH, inches) 9.5 x 23 x 18
Dimensions (DWH, cm) 24 x 58 x 46
Weight (lbs / kg) 45.4 / 20.6

Okay so this amp is just incredible. You'll pay lots more for far inferior amps than this! It is slightly used and has a slight graze in the tolex and a couple of marks in the grill cloth. The amp has been completely serviced by BBZ prior to offering it for sale. The only other YCV40 we were able to find for sale with a european transformer, made for the UK, is over £1,400!!!

USED JP50 PRB

The JP50 is based on the Music Man® JP6 incorporating many of the same features. Solid contoured basswood body with custom designed forearm contour, Music Man® approved Sterling® designed Modern Trem Bridge.Contoured Basswood body.

- Glossy Pearl Red Burst Finish
- Maple neck w/ rosewood fingerboard
- 24 Medium Jumbo Frets
- Sterling® Modern Tremelo Bridge Recessed
- Locking Tuners
- Custom fitted high quality Sterling Gig Bag

RARE, RARE, RARE at the moment in this colour, this is a beautiful example in Pearl Red Burst. Set up and ready to Rock.The condition is really as new.

***REALLY RARE USED SHEENA LE003 - USA Limited Edition


Body
Deep access single-cutaway alder body
Single black binding

Neck
Two-piece flame-maple with walnut centre-strip
D-profile
6-in-line headstock
Set-neck for enhanced strength





(Click the image for information about free accessories etc.)

Fingerboard
Birds eye maple fingerboard with black binding
25” scale
Black pigment ‘pointer’ inlays
Hand-cut Corian nut
Jumbo fret wire

Hardware
Gotoh 510 mini machineheads
First Act proprietary string-through retainer and tailpiece
First Act proprietary low profile bridge
Multi-layer black pickguard
Hipshot O-Ring chrome knobs

Electronics
1 x First Act single coil neck pickup with custom chrome housing
1x First Act humbucker with hand-wound Alnico V magnets and custom chrome housing
2 volume controls, 1 tone control, 3-way toggle switch, series/parallel push/pull

"A serious and versatile guitar that stands out
from the crowd and covers a great deal of ground."

Dave Burrluck - Sheena LE003 Review - Guitarist Sep 2007

This guitar is in great condition with only a slight mark on the top and no fret wear to be seen! The guitar comes with a fully fitted flight case and has been fully set-up by BBZ. It plays great and when you consider it was £1,800 when new, this is a great opportunity to buy a really rare and excellent guitar for a bargain price.

Vintage VS6 Series. Secondhand bargain, original RRP £269


Body: Mahogany
Neck: Mahogany – Set Neck
Fingerboard: Rosewood
Scale: 24.75"/628mm
Frets: 22
Neck Inlays: Pearloid Crown Tuners: Wilkinson® Deluxe WJ44
Bridge: Tune-O-Matic with Stop Bar Tailpiece
Pickups: Wilkinson® Double Coil x 2 (N)MWVC (B)MWVC
Hardware: Chrome
Controls: 2 x Volume/ 2 x Tone/ 3-Way Toggle




‘...winding the wick down a tad and flicking to the neck pickup gets you a classy throaty blues sound that’s creamier than Unigate.’
Total Guitar

This guitar has one tiny mark on it... Apart from that it is as new, so it's a bargain and has had a full Pro Setup

**Used Westone Concord II, Made in Japan in 1981/2

Made in Japan in the famous Matsumoku plant in 1981-2


Solid Alder body,
Hard Rock Maple neck,
Rosewood fingerboard,
25.5 inch scale,
21 frets (no noticable wear!)
3 GS350 pickups,
5 way lever switch,
Master volume and two tone controls
Nickel tuners,
brass bridge and nut,
plastic knobs
3 ply white scratchplate (Matches body contours)
Black gloss finish
Script logo on headstock,
Headstock colour matches body colour.
Serial number stamped on the neck plate.

This is a superb example of a quirky but great guitar. There are a few dings in the top between the bridge and the end pin strap button, but for a 30 year old guitar the general wear is really light. The frets are as new!!
It has been professionally set up by BBZ to a very high level of playability, with a low fast action. All electrics work perfectly.
This is a real surprise when you plug it in. The original pickups are very nicely voiced.

Collection only on this guitar. There's a FREE high quality gig bag included in the price.
A real collectors item which cries out to be played.

Vintage AV3 Series Original RRP £499

With a body style familiar to the eye, the Vintage AV3 is carved from a solid block of premium mahogany, resulting in a reduced weight acoustically chambered body with solid centre block.

Combining these features with the elegant and comfortable Vintage family offset cutaway body shape, the AV3 is a real player's guitar, definitely one of the stars of the AV range. Including a hand-carved solid maple top with flame maple veneer, the AV3 offers unparalleled features and value.

Wilkinson pickups are controlled by master volume, master tone, and unique Vintage 'Roll Control' for humbucking (stacked P90 or WVC side-by-side humbucker) mode to single coil operation – a truly versatile system.

And - on the new 3 x P90 stacked humbucking-equipped AV3, designer Trev Wilkinson has included a ‘Push-Pull’ mid pickup selection option on the tone pot. In conjunction with the
standard 3-way toggle switch, this allows the middle pickup to be selected at any time, thereby adding ‘out of phase’ pickup options to the sound of the guitar.

AV3P Specifications
Top: Solid Hand Carved Flamed Maple - Flamed Cherry Red
Body: Chambered Mahogany
Binding: Single Ply Ivory
Neck: Mahogany – Set Neck
Fingerboard: Bound Rosewood, dot markers
Top Nut: Ivory/Graphite
Tuners: Wilkinson® WJ44
Bridge: Tune-O-Matic
Scale: 24.75”/628mm Frets: 22
Pickups: Wilkinson® P90 Stacked Humbucker x 3 (N) W90SKN (M) W90SKM (B) W90SKB
Controls: 1 x Volume, 1 x Tone, 1 x ‘Roll Control’ (Humbucker to Single Coil), 3-Way Toggle
Hardware: Nickel

In mint condition, this guitar has been fully set up by BBZ and is offered with a padded gig bag.

Specifications

Mahogany Body
Mahogany/Set Neck
Rosewood Fingerboard
Star Inlays
Grover Exclusive Tuners
24.75" Scale
Randall Pickups, Active EMG-Like Egnater Neck and Bridge
Licensed Floyd Rose
Buzz Feiten Tuning System
Colour: Black

What a super axe for heavy metal/ shredding and more rocky tones too! All checked over and set up by BBZ. This guitar is in pristine condition. New it was a £650 guitar, so it's a real bargain...

This is a great sounding authentic lap steel made in London by the famous Selmer company circa 1960s.

The instrument has been serviced and plays brilliantly. The guitar is integral to the case, very unusually. The electrics are spot on, there's a single coil pickup with adjustable heights for each string.

Stunning instrument in excellent condition, being offered by BBZ on commission to the owner.